Home > PRODUCTS > HSK TOOL HOLDERS - Din 69893 - ( ISO 12164 ) > DIN 69893 - 1 ( A - C ) > HSK A 100 > Heavy Duty MILLING ARBORS for screw-in cutters

MDR

Heavy Duty MILLING ARBORS for screw-in cutters

• The optimized design with better construction
combines with shrink-fit technology ,high rigidity
with vibration dampening features

• Chuck Body Fine Balanced G 2,5 - 25.000 Rpm - Or U< 1 gmm
• Run Out 3 micron • L1< 3° slope at the top

Heavy Duty MILLING ARBORS for screw-in cutters

• Kombi Tool-Holder with shrink-fit technology

HKA.100.CTP + CIL...MDR

Code	Technical data
	d 1	L	D 2	D 3	L1	APPLICATION
MDR
HKA.100.MDR08.025	8,5-M8	115	13,5		25	KOMBI	login
HKA.100.MDR08.050	8,5-M8	140	13,5	15	50	KOMBI	login
HKA.100.MDR08.075	8,5-M8	165	13,5	15	75	KOMBI	login

HKA.100.MDR10.025	10,5-M10	120	18		25	KOMBI	login
HKA.100.MDR10.050	10,5-M10	145	18	19	50	KOMBI	login
HKA.100.MDR10.075	10,5-M10	170	18	19	75	KOMBI	login
HKA.100.MDR10.100	10,5-M10	195	18	19	100	KOMBI	login

HKA.100.MDR12.025	12,5-M12	120	21		25	KOMBI	login
HKA.100.MDR12.050	12,5-M12	145	21	24	50	KOMBI	login
HKA.100.MDR12.075	12,5-M12	170	21	24	75	KOMBI	login
HKA.100.MDR12.100	12,5-M12	195	21	24	100	KOMBI	login

HKA.100.MDR16.050	17-M16	150	29		50	KOMBI	login
HKA.100.MDR16.075	17-M16	175	29	29	75	KOMBI	login
HKA.100.MDR16.100	17-M16	200	29	29	100	KOMBI	login
HKA.100.MDR16.125	17-M16	225	29	29	125	KOMBI	login

Accessories