PUH (DIN 6595)
ADAPTER FOR DRILLING TOOLS
• Chuck Body Pre- Balanced G 6,3 - 15.000 Rpm
• Run Out 3 micron • With set-up screw • Fewer obstacles (table D2) • Greater axial precision (d1 +0/+0,005)
• Greater resistance to torsion thanks to offset position of tool tightening screws
• Possible to use insertion tips with tool shank diameter 40
• Greater rigidity above all tools with abutting end
• ”AD” Form
OPTIONAL:
Possibility to use screw with horizontally pivoted halfsphere
AVS HWN10 for diam. 14 ÷ 25
For Whistle Notch type DIN 1835 E - DIN 6535 HE
| Code |
Technical data |
|
| |
d1 |
L |
D2 |
D3 |
|
|
|
APPLICATION |
 |
|
|
SKC.040.PUH20.100
|
20 |
100 |
42 |
44.5 |
|
|
|
DIN 6595
DIN 6535 HE |
login |
|
|
SKC.040.PUH25.100
|
25 |
100 |
48 |
|
|
|
|
DIN 6595
DIN 6535 HE |
login |
|
|
SKC.040.PUH32.080
|
32 |
80 |
58 |
|
|
No RVR |
|
DIN 6595
DIN 6535 HE |
login |
|
|
SKC.040.PUH40.080
|
40 |
80 |
63 |
|
|
No RVR |
|
DIN 6595 |
login |
|
(4).png)
.jpg)